Does your charger wire get damaged too?
4 Easy Ways to Fix a Bad Charger at Home.
A bad charger can annoy anyone. So today we will tell you some precautions about the charger and some ways in which you can fix the wire of your charger which is about to break.
1. Wrap the phone cable
Phone cable is easily available in the market. Wrap it tightly around your mobile phone. In this way, a protective layer will be applied on the part that is deteriorating and the process of deterioration will stop.
2. Glue
If you have a glue gun, remove the glue from the broken part of the wire and set it well by hand. This can be done with just glue or ordinary glue.
3. Cable byte
Cable bytes are available in the market that can be set in any place by holding the wire in a snap. If they are fitted with cable bytes where the wire is breaking, the affected part will be safe.
4.Tape
It is also a good idea to wrap the tape around the broken part of the wire, but make sure that the tape is set and applied well at once, as repeated removal and insertion can further damage the wire.
Do not remove the charger like this
Usually people separate the wire from the mobile phone and pull it out from the top or forcefully, which causes the wire to break from the bottom. Always hold the wire with both hands and separate it from the bottom so that both the mobile and the wire are not damaged.
0 Comments